Page 1 of 1

FS2004 VİRTUAL COCKPİT KURULUMU

PostPosted: 30 May 2017, 08:35
by aviator97
Millet öncelikle merhaba sorunum şu ki posky 737 uçağına virtual cockpit kurulumu yapamıyorum internettende baktım bi kaç bişey var ama aynısını yaptığım halde çalışmadı uçak ve cockpit posky olduğu halde elimde virtual cockpit 1.1 var sizce nasıl yapmalıyım

Re: FS2004 VİRTUAL COCKPİT KURULUMU

PostPosted: 30 May 2017, 12:34
by artuncs
Gecmis zamanda cok kafa yorduk bu islere ama Posky'in zamani geceli cok oldu. Olan bilgiler de hizla yok oluyor internet ortaminda.

Bununla birlikte tam olarak ne yaptigini yazsaydin ona gore belki nerede hatan oldugunu soyleyebilirdik. Indirdigin dosyada eksiklikler olabilir. Baska sitelerden de indirip denemeni tavsiye ederim. Fakat sunu soyluyum butun is panel.cfg de bitiyor. Benimde aklimda kaldigi sekli ile assagida ki yazida bir arkadas aciklamis. Bana gore anlattagi sekilde eksiksiz yaparsan calismasi lazim. Bir dene istersen;



I searched this about 100 times on Google with no results, so I decided to try by my own... And it paid off! Here is a step by step tutorial I made:

1. Copy the Panel, Sound and Soundai folders from the default 738 folder to the POSKY folder.

2. Open the texture folder (the one that has no ".1" or other .something) and copy every file except for thumbnail.jpg into the POSKY 737 texture folder.

3. Copy the file B737_800_interior.mdl from the default 738 model folder to the POSKY 737 model folder

4. Add the following line to the model.cfg:
CODE: SELECT ALL
interior=B737_800_interior

5. Open the default 738 aircraft.cfg and copy all the content from [CameraDefinition.0] to [CameraDefinition.004]

6. Scroll down until you find [Views]. Replace that section with this:
CODE: SELECT ALL
[Views]
eyepoint=43, -1.55, 1.9 //(feet) longitudinal, lateral, vertical distance from reference datum - Opensky Model
//eyepoint=38.70, -1.31, 3.7 // Default FS VC


7. Enjoy!

I'm pretty sure that's all I did, so I hope it will work for you also. Sorry, I'm not the best in english... It works for the POSKY 737-700 normal model, make sure you have the updated MDL file from their website. To install on other models, playing with the eyepoint in the [Views] section will probably make it work.

Agaguk Jarin

Re: FS2004 VİRTUAL COCKPİT KURULUMU

PostPosted: 30 May 2017, 14:31
by aviator97
Sağolun hocam deniycem

Re: FS2004 VİRTUAL COCKPİT KURULUMU

PostPosted: 01 Jun 2017, 21:21
by THY4016
Diğer başlıkta belirttiğim gibi eğer yazılımcı şirketin uçağının modellemesinde yoksa olmaz.Nispeten çalıştırsanız bile sorunsuz çalışmaz.iFly 737NG tarzı ücretli yazılımları satın alıp sorunsuz kullanabilirsiniz.Default uçaklardan pek fazla birşey beklemeyin aksi halde hayal kırıklığı olur.